EDM QUICK OPERATION

1. Level the tripod

2. Attach the EDM and level it - coarse level - circular bubble

3. Unlock the two rotation controls and level again in at least 2 directions

4. Power on, then spin telescope through 180°

5. IF the unit can be oriented north, then point it north and set this as 0 with F1 (0 set)

If the unit can only be orientated in a known direction (whole degrees) then use

F3 (H set) and key in the orientation: INPUT

6. Push to set for ZNE

7. Line up on the reflector on the rod

unlock the rotation controls for coarse adjustment, then lock for a fine adjustment

NOTE: rod should be held vertical and be facing the EDM

8. Push F1 (meas) to get a measurement.

To put away:

1. turn the unit off

2. rotate the unit to line up the two small white dots.