TAMSEIS LOG SHEET INSTALATION STATION: RIS0

LOCATION: Latitude:78 04’ 59.8” Longitude: 172 29’ 56.0” Declination: 137 13.7’

Date: 12/08/00 Julian: 342 Time, GMT: _12:14 PM__ Local: 01:14 AM

Field Team: Sridhar Anandakrishnan, Jerry Bowling, Jesse Fisher

Site Configuration: (WGs, PVs, Type of surface) 2 Pvs on bamboo poles, wood block placed in fern.

Site Condition: Undisturbed fern.

Weather (wind, temp., clouds, definition. and horizon.): low winds from south at ~ -3 C, clear horizontal horizon in all directions except Mt Eribus.

Station Status: Battery Voltage (at battery): 13.48 V

Comments: Check

DAS Status: DAS S/N: 1051 Version No.: 02.50,03.00A, 02.60

(UTILITIES/DAS STAT) ACQ: STOP SCI: + EVENTS: 0

DISK Status: S/N OF DISK: 5103 SIZE: 4.4 Gb

(UTILITIES/SCSI STAT) BLOCKS USED: 2 TOTAL: 4440121

Clock Status: (UTILITIES/XCLK STAT) Last Lock Time: 342 12:27

CLOCK S/N: 1241 CLOCK CABLE TYPE: GPS to COM

ARGOS S/N: NONE ARGOS PLATFORM NO.: NONE

Sensor Status: Sensor Type: Gurelp 3T Sensor S/N: 302

Voltage at Sensor: 13.1 Sensor Level: Check

Mass Positions:

	Before Centering	First Centering	Final Centering	Attempts
V
E/W
N/S

CALIBRATION PEROFORMED: YES: NO: X

STOP ACQUISITION (COMMNCTNS/STOP ACQ) Check

CHECK SCSI STATUS (UTILITIES/SCSI/STAT)

BLOCKS USED: SAME TOTAL: 440121

CLEAN BATTERY TERMINALS AND CHECK ALL CONNECTIONS: Check

SWITCH DISCKS

DISK S/N: SAME SIZE: SAME

CLEAR RAM (UTILITIES/CLEAR RAM)

FORMAT SCSI (UTILITIES/FRMT SCSI/DISK) Check

CHANGE DAS PARAMETERS:

A) COPY OLD PARAMS TO EHT (COMMNCTNS/RECV PRMS): Check

B) EDIT PARAMETERS:

a. NEW START TIME: 343, 00:00:00

b. STATION NAME: RIS0

C) SEND NEW ONES (COMMNCTNS/SEND PRMS): Check

D) NOTE ANY OTHER PARAMERE CHANGES HERE:

RECORD SAMPLING RATE: Stream 1: 1 Stream 2: 40

RESET DAS (UTILITIES/SYS RESET) Check

START ACQUISITION (COMMNCTNS/START ACQ):

Start time: 2000:242:12:56 AM

RECHECK:

A) DAS STATUS:

ACQ: ON/OFF SCSI: +/- NO. OF EVENTS: 4

B) SCSI STATUS

BLOCKS USED: 2 TOTAL: SAME

C) CLOCK STATUS: Last lock time: 342:12:46

D) MAKE SURE THAT ALL PLUGS AND CONNECTIONS HAVE BEEN REPLACED: Check

NOTES:

A) Channel 4 (vertical) pegged at –3200.

B) Channel 5 (E/W) OK.

C) Channel 6 (N/S) OK.

PICTURE OF SITE: